Audi A4 Quattro Suspension Kit Installation Instructions

Audi A4 Quattro Suspension Kit Installation Instructions - • Remove Wheels • Remove nut (1) and bolt (2). (According to manufacturer, “Audi”, bolt and nut must be replaced) • move the two upper balljoints (3 and 4) upwards. • remove nut (5) and bolt (6). • remove caps and take off nuts (7 and 8). • remove complete shock spring assembly. • Dismantel using spring compressor • while dismantling the shock spring assembly – review the parts list. • Note: When removing the spring shock – unit consider the position of the pivot bearing (Figure 2). • Adjust lower spring seat height (see parts list, upper edge spring plate to center attachment bolt) • Installation is the reverse or removal. Note torque specs of following page. Kit instructions for threaded Suspension Kit Audi A4 Quattro • Remove Wheels • Remove nut (1) and lower damper attachment bolt (2) • Remove nut (3) and bolt (4). • Remove four bolts (Noted as 5) and remove the complete suspension assembly. • Remove bolt from top of shock. • During assembly of the unit, position the top fixing eye correctly relative to the lower eye. • Adjust spring seat height (figure 4, upper edge spring seat to center of mounting bolt) · • Installation is the reverse of removal. • Torque to spec. 1. Upper mounting nut M12 x 1.25 2. Upper spring seat. 3. Bump Rubber and dust shield. 4. Spacer. 5. Plastic Washer. 6. Front Damper with Threaded sleeve. 7. Front coil spring. 8. Upper mounting bolt and nut. 9. Threaded body shock. 10. Upper mounting assembly. 11. Rear coil spring. Items 2, 3, 4, 8 and 10 are Original – Audi – Parts!

Download : Audi A4 Quattro Suspension Kit Installation Instructions

Posted in: Audi