PMT 2008 Ford 6.4L PowersTroke Version 1.0.1.2 - This is a temporary
document that describes the
steps needed to
install the Ford 6.4L Power stroke file onto the PMT. This document will be consolidated into the complete PMT installation
manual
as soon as development is complete for the GM 6.6L duramax LMM and 6.7L
d odge Cummins applications are also complete. The installation topics
covered in this document include: • PMT Fixed Dash Mount • Parts Installation • Uploading the 6.4L
files from the Update Agent to the SD card • Uploading the 6.4L Files from the
SD card to the PMT • Verify 6.4L File Upload • Install Download •
Download Features • Transmission Tuning • Monitoring Features • Pyrometer Location and Overview • Defueling Features. The Fixed dash Mount for the 6.4L Ford Power stroke is an option that is sold separately (s ee product data sheet
for pricing info). The Fixed dash Mount places the PMT into a location
that is easily accessible to the driver and out of the view of the road.
For
instructions on attaching the PMT cradle to the Fixed dash mount refer to the PMT instruction set. refer to the PMT installation Manual to identify the parts described below. The installation overview provides a quick reference
installation guide for the LMM. see the install overview below. There are three general steps that need to take place to install
the PMT on the 6.4L Power stroke to complete the installation of the
parts: 1. The first step in installing the PMT and all of the parts is
determining the mounting position for the PMT. There are two mounting
positions offered for the PMT: add on dash Mount and Universal dash
mount. see the back PMT mounting section in this document for reference to the add on dash Mount. refer to the PMT instruction manual for universal dash Mount installation instructions.
2. The second step includes running the Cradle Cable from the PMT
mounting position down to the oBd ll block, and plugging it into the oBd
ll block. see the oBd ll
diagram below to see the location of the oBd ll port and how the Cradle Cable plugs into the oBd ll block. For in- depth instructions refer to the PMT installation manual.
3. run the Power Wire down near the oBd ll port like the Cradle Cable.
Locate the accessory wires tucked under the dash behind the oBd ll port
(see oBd ll diagram). Use the snap connected to tap
into the lavander accessory wire. The label around the accessory wires
will identify the correct wire with the label: LV inG (10a).
21.18
Unknown
Posted in: Ford
0 komentar:
Posting Komentar