2002-2006 AUDI A4 IN DASH INSTALLATION KIT

2002-2006 AUDI A4 IN DASH INSTALLATION KIT - 2002-06 Audi A4 vehicles. Included are all the parts you need to mount your car stereo/cassette or CD player into your vehicle’s dash. Refer to the individual instruction in this manual to remove your vehicle’s factory radio and assemble the kit.

CAUTION: Disconnect your vehicle’s negative battery terminal before the installation to help prevent electrical damage. We recommend the use of a volt/ohm meter over a test light to check wiring. A test light or grounded wire probe can cause damage to the vehicle’s computer and/ or diagnostic systems. Avoid all factory air bag wiring – air bags can accidentally deploy causing serious injury or death. NOTES: •See your vehicle’s instructions for any special tools your installation might require.

Read all instructions accompanying your car stereo/cassette player for proper wiring and mounting instructions. CAR STEREO CONNECTORS PROVIDE EASY CONNECTION OF YOUR CAR STEREO TO FACTORY WIRING HARNESS. VW03B 2002-UP Volkswagen and BMW CAUTION: REAR SUPPORT AVAILABLE SEPARATELY. REAR SUPPORTING THE RADIO ADDS TO THE INSTALLATIONS RADIO REMOVAL: 1. Using two (2) sets of DT-2 radio removal tools, push into all four (4) slots until secure. 2. Pull out radio, unplug and remove. IN DASH DIN PULLOUT, DETACHABLE FACEPLATE, (DIN-E) RADIOS The kit panel comes DIN ready, Follow the instructions supplied with the radio, secure the mounting kit.

Install the assembly in the dash and use the rear support strap supplied with the radio to support the rear of the radio. 2 5716R BRACKET. ATTACHING MOUNTING BRACKETS (FRONT): Align the (2) 5716L and 5716R brackets with location openings on the kit panel. Pressure fit, push into locations until in place.

Download : 2002-2006 AUDI A4 IN DASH INSTALLATION KIT

Posted in: Audi